我的研華會員註冊

「我的研華」為研華客戶專屬服務平台。成為研華會員,您將收到最新產品資訊、研討會邀請和線上商店特殊優惠。

立即註冊,啟用您的會員服務!

AMAX-3285IO

Advanced 8-axis EtherCAT Motion Slave Modules with 16DI/16DO Expansion
  • Max. 5 MHz, 8-axis pulse output
  • Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  • BoardID is switchable
  • Easily visible LED indicators on board to do diagnosis
  • Direct wire to servo drive to save terminal board space while installation
  • Horizontal installation for for servo or stepping motor driver
  • Suitable for DIN-rail mounting
  • Programmable interrupt
  • Memory buffer (10K points) for trajectory planning which is designed in DSP
  • 2-axis position compare triggering up to 100 KHz, and memory buffer is up to 100 K points
  • Position latch
  • Supports gantry mode by semi-closed loop pulse train control
  • RDY/LTC-dedicated input channels & SVON/CMP/CAM-DO/ERC-dedicated
  • Output channels are switchable for general input and output purposes
AMAX-3285IO provides the ability to connect step motor drives and servo motor drives with CW/CCW and Pulse/Direction interfaces to EtherCAT networks controlled by Advantech EtherCAT master PCI-1203. AMAX-3285IO has open frame designs for horizontal placement and an interface connector mounted on the board. With a to-servo-drive transfer cable, it can be conveniently connected to Mitsubishi J3/J4, Yaskwa Sigma V/7, and Panasonic A4/A5 servos.

AMAX-3285IO is an 8-axis EtherCAT motion slave module that supports motion interpolation, axes synchronization, and continuous contouring. Advantech also provides a common motion API library, graphical utility, and user-friendly examples to reduce the programming load and facilitate easy configuration and diagnosis.

規格 下載規格表

  • 產品料號
  • 相關訊息
Encoder Interface
  • Counts per Enc. Cycle
  • Input Range
  • Input Type
  • Isolation Protection
  • Max. Input Frequency
General
  • Bus Type
  • Certification
  • Connectors
  • Dimensions (L x W x H)
  • Humidity
  • Operating Temperature
  • Power Consumption
  • Power Input
Pulse Type Motion Control
  • Home Modes
  • Local I/O - General Input Signal
  • Local I/O - General Output Signal
  • Local I/O - General Purpose I/O
  • Max. Output Speed
  • Motor Driver Support
  • Number of Axes
  • Pulse Output Type
  • Step Count Range
  • Velocity Profiles

Encoder Interface

  • Counts per Enc. Cycle

    AMAX-3285IO-AE x1, x2, x4 (A/B phase only)
  • Input Range

    AMAX-3285IO-AE Low: 0 ~ 0.5V / High: 3.5 ~ 7V
  • Input Type

    AMAX-3285IO-AE A/B phase, CW/CCW
  • Isolation Protection

    AMAX-3285IO-AE 2,500 VRMS
  • Max. Input Frequency

    AMAX-3285IO-AE 10 MHz @ 4xAB

General

  • Bus Type

    AMAX-3285IO-AE EtherCAT
  • Certification

    AMAX-3285IO-AE CE, FCC Class A
  • Connectors

    AMAX-3285IO-AE 2 x RJ-45 for communication port / 1 x Terminal block (4P) for power / 1 x Terminal block (2P) for +5V output / 8 x DB-26 connector by transfer cable to servo drives / 8 x Terminal block (16P) for home, Limit, LTC, CMP and extra 16DI/16DO
  • Dimensions (L x W x H)

    AMAX-3285IO-AE 255 x 141 x 60 mm (5.6 x 4.3 x 2.4")
  • Humidity

    AMAX-3285IO-AE 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
  • Operating Temperature

    AMAX-3285IO-AE 0 ~ 60°C (32 ~ 140°F)
  • Power Consumption

    AMAX-3285IO-AE 15W MAX (625mA @ 24V)
  • Power Input

    AMAX-3285IO-AE 24VDC ±10%

Pulse Type Motion Control

  • Home Modes

    AMAX-3285IO-AE 16 home mode + home motion defined by CiA402
  • Local I/O - General Input Signal

    AMAX-3285IO-AE Input voltage: 24Vdc Max. / Input delay: 100us Max. (isolation delay) / Signal: EMG (emergency stop); ORG, LMT+, LMT-; INPOS (in position signal); LTC (counter latch); RDY (servo ready); ALARM (servo alarm)
  • Local I/O - General Output Signal

    AMAX-3285IO-AE Output voltage: Open collect 24Vdc Max / Output delay: 100us Max. (isolation delay) / Sink current: 100mA per channel / Signal: CMP (position compare in range output); SVON (servo on); RALM (reset driver alarm); ERC (counter clear signal)
  • Local I/O - General Purpose I/O

    AMAX-3285IO-AE 16DI/16DO (terminal block)
  • Max. Output Speed

    AMAX-3285IO-AE 5 Mbps
  • Motor Driver Support

    AMAX-3285IO-AE Pulse-type servo
  • Number of Axes

    AMAX-3285IO-AE 8
  • Pulse Output Type

    AMAX-3285IO-AE OUT/DIR, CW/CCW
  • Step Count Range

    AMAX-3285IO-AE ±134, 217, 728
  • Velocity Profiles

    AMAX-3285IO-AE T-Curve, S-Curve

技術支援

想瞭解更多嗎?歡迎線上詢問。研華專業技術代表 24 小時在線。