我的研華會員註冊

「我的研華」為研華客戶專屬服務平台。成為研華會員,您將收到最新產品資訊、研討會邀請和線上商店特殊優惠。

立即註冊,啟用您的會員服務!

PCI-1245LIO

4-Axis Stepping and Servo Motor Control Universal PCI Card with I/O Extension
  • Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  • Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  • Supports 2 axis Linear interpolation
  • Supports 3 axis Linear interpolation
  • Supports 2 axis Arc interpolation
  • Supports T/S-curve
  • Supports speed override
  • Hardware emergency input
  • Watchdog timer
  • Supports programmable acceleration/deceleration rate
  • Programmable interrupt
  • RDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes
  • Supports extra 16 isolated DI / 16 isolated DO via wiring board
The PCI-1245L/45LIO are 4-axis universal PCI cards (supporting both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control card designed for entry-level applications which need to control JOG, point to point, continuous move and interpolation motion such as 2-axis linear, 3-axis linear (PCI-1245LIO) and 2-axis arc move (PCI-1245LIO). The PCI-1245LIO also provide extra 16 DI and 16 DO via terminal board, MTB-3956LIO.
In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming load, helping users complete configuration and diagnosis easily.

規格 下載規格表

  • 產品料號
  • 相關訊息
Encoder Interface
  • Counts per Enc. Cycle
  • Input Range
  • Input Type
  • Isolation Protection
  • Max. Input Frequency
General
  • Bus Type
  • Connectors
  • Dimensions (L x H)
  • Humidity
  • Operating Temperature
  • Power Consumption
  • Storage Temperature
Pulse Type Motion Control
  • Interpolation
  • Local I/O
  • Max. Output Speed
  • Motor Driver Support
  • Number of Axis
  • Position Counters
  • Pulse Output Type
  • Step Count Range
  • Velocity Profiles

Encoder Interface

  • Counts per Enc. Cycle

    PCI-1245LIO-AE x1, x2, x4 (A/B phase only)
  • Input Range

    PCI-1245LIO-AE 3~10 V
  • Input Type

    PCI-1245LIO-AE Quadrature (A/B phase) or up/down
  • Isolation Protection

    PCI-1245LIO-AE 2,500 VDC
  • Max. Input Frequency

    PCI-1245LIO-AE 10 MHz under 4xAB mode

General

  • Bus Type

    PCI-1245LIO-AE Universal PCI V2.2
  • Connectors

    PCI-1245LIO-AE 1 x 100-pin SCSI female connector
  • Dimensions (L x H)

    PCI-1245LIO-AE 175 x 100 mm (6.9" x 3.9")
  • Humidity

    PCI-1245LIO-AE 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
  • Operating Temperature

    PCI-1245LIO-AE 0 ~ 60°C (32 ~ 140°F)
  • Power Consumption

    PCI-1245LIO-AE Typical: 5 V @ 0.6 A, Max.: 5 V @ 1 A
  • Storage Temperature

    PCI-1245LIO-AE -20 ~ 85°C (-4 ~ 185°F)

Pulse Type Motion Control

  • Interpolation

    PCI-1245LIO-AE 2-axis linear interpolation
  • Local I/O

    PCI-1245LIO-AE Machine Interfaces: LMT+, LMT-, ORG / Servo Driver Interfaces: ALM, INP / General Digital I/O: 16-ch DI, 16-ch DO (RDY pin can be switchable to general-purpose input and SVON/ERC pin to general purpose
  • Max. Output Speed

    PCI-1245LIO-AE 1 Mbps
  • Motor Driver Support

    PCI-1245LIO-AE Pulse-type servo/stepping
  • Number of Axis

    PCI-1245LIO-AE 4
  • Position Counters

    PCI-1245LIO-AE Range of command and actual position
  • Pulse Output Type

    PCI-1245LIO-AE Pulse/direction (1-pulse, 1-direction type) , CW/CCW (2-pulse type) or single-ended +5V output
  • Step Count Range

    PCI-1245LIO-AE ±2, 147, 483, 646
  • Velocity Profiles

    PCI-1245LIO-AE T-Curve, S-Curve

技術支援

想瞭解更多嗎?歡迎線上詢問。研華專業技術代表 24 小時在線。