我的研華會員註冊

「我的研華」為研華客戶專屬服務平台。成為研華會員,您將收到最新產品資訊、研討會邀請和線上商店特殊優惠。

立即註冊,啟用您的會員服務!

設備自動化

研華的設備自動化提供的垂直應用平台,範圍從工業監控工作站、工業級中央處理器,到運動控制、高效能工業電腦、串列設備伺服器及自動化控制器,皆適用於集中式與分散式運動控制解決方案,並能廣泛應用在 SMT/PCB、半導體、LCD 製造業等。藉由集中式的運動控制解決方案,研華的多軸運動控制卡、PC-based 控制器及嵌入式控制器可被廣泛的使用。針對分散式控制解決方案,研華的全系列 AMONet(研華運動控制網路),以及可節省時間之鋁軌式 (DIN-rail) 運動控制模組則是最佳選擇。

產品型錄

  • EtherCAT Solution

    Advantech’s EtherCAT solution, includes master cards and slave modules, to precisely synchronize the motion of multiple-axis and deliver high speed data via an enhanced I/O capability. EtherCAT Servo drives and an Advantech ADAM-5000/ECAT I/O system with multiple DIO and AIO slave modules can be directly connected to the PCI-1203, master card, to communicate in real-time using the EtherCAT protocol.

  • 智能視覺系統

    Advantech EagleEye智能相機不僅具有體積小且高度整合的特性外,更藉由內建的圖形化軟體設定工具以快速佈建開發、易於維護管理等特色,讓原有的設備控制不但能立即升級成具有機器視覺功能的自動化應用,更能透過EagleEye所提供的影像進行精準的比對與檢測,進而提升工廠生產線的品質控管。 Advantech 的 EagleEye 內建光隔離 I/O,能將線路直接連接至相關的控制裝置。 10/100 BaseT 乙太網路連接埠提供設定與監控存取、執行階段控制及標準通訊協定,且被動式乙太網路供電支援單一纜線介面。 整合式指示燈連接器能為外部 LED 光源提供電源及瞬閃控制,且 EagleEye IDR 允許合併 1D 和 2D 追蹤與其他檢測任務,例如字形辨識 (OCR) 及功能驗證。

    • QUARTZ

      The Advantech Quartz industrial camera series have between 0.3-10.0 mega pixel CCDs and include ultra-fast speeds and a high level of technology in a very small form factor. With the Quartz series, you can choose to use many of the most popular data interfaces in the machine vision market: the popular Gigabit Ethernet interface comes with a 100 meter cable length, and PoE (Power over Ethernet) to provide camera power and data via a single cable, and also offer separate input/output ports for triggering or flash control.
    • PCIE-1174

      The PCIE-1172/1174 series is a PCI Express® dual/quad channel frame grabber for two/four independent GigE Vision cameras. They feature GoE(GigE Vision Offload Engine), PoE(Power over Ethernet) and ToE(Trigger over Ethernet) for high performance, robust and reliable machine vision applications. Unlike conventional NICs (network interface controller) GigE Vision protocol is implemented in software and executed on the host CPU, the processor must spend more resource to handle the network traffic and incoming frames rather than the machine vision algorithms, especially in high bandwidth, multiple camera applications. The GoE feature significantly off-loads the GigE Vision protocols into dedicated FPGA(Field Programmable Gate Array), reconstruct the image then transmit to the Host PC via DMA(Direct Memory Access) in real time, release the host processor resource to execute algorithm and applications and there is no frame or packet loss during the image acquisition. The comprehensive ToE/PoE features can lower the installation/maintenance effort through the single cable connection, and reduce image acquisition latency, with the Ad hoc network feature, the connection between GigE Vision cameras and frame grabber are self-configuring, the user define IP address is no longer necessary, and significantly reduces the installation and maintenance cost and effort.
    • PCIE-1172

      The PCIE-1172/1174 series is a PCI Express® dual/quad channel frame grabber for two/four independent GigE Vision cameras. They feature GoE(GigE Vision Offload Engine), PoE(Power over Ethernet) and ToE(Trigger over Ethernet) for high performance, robust and reliable machine vision applications. Unlike conventional NICs (network interface controller) GigE Vision protocol is implemented in software and executed on the host CPU, the processor must spend more resource to handle the network traffic and incoming frames rather than the machine vision algorithms, especially in high bandwidth, multiple camera applications. The GoE feature significantly off-loads the GigE Vision protocols into dedicated FPGA(Field Programmable Gate Array), reconstruct the image then transmit to the Host PC via DMA(Direct Memory Access) in real time, release the host processor resource to execute algorithm and applications and there is no frame or packet loss during the image acquisition. The comprehensive ToE/PoE features can lower the installation/maintenance effort through the single cable connection, and reduce image acquisition latency, with the Ad hoc network feature, the connection between GigE Vision cameras and frame grabber are self-configuring, the user define IP address is no longer necessary, and significantly reduces the installation and maintenance cost and effort.
    • PCIE-1674E

      The PCIE-1672E/PCIE-1674E PoE (Power over Ethernet) PCIE series is PCI express communication card which supports 2 or 4 independent 10/100/1000BaseT(X) 802.3af (PoE) compliant Ethernet ports. With 12 VDC AT/ATX power input, the PCIE-1672E/PCIE-1674E can boost then provides up to 15.4 watts at 48 VDC power to maximum 2 or 4 x PoE ports on each module. It allows power to be supplied to connected devices, such as PoE-based GigE cameras in machine vision inspection systems, without the need to use separate PoE injectors for those applications. The PCIE-1672E/PCIE-1674E is ideally designed for scientific research instrumentations, Medical Research  Instrumentations, Gigabit Ethernet surveillance IP cameras in intelligent transportation systems, which can also benefit from a scalable Gigabit backbone construction with Power-over-Ethernet support.
    • PCIE-1672E

      The PCIE-1672E/PCIE-1674E PoE (Power over Ethernet) PCIE series is PCI express communication card which supports 2 or 4 independent 10/100/1000BaseT(X) 802.3af (PoE) compliant Ethernet ports. With 12 VDC AT/ATX power input, the PCIE-1672E/PCIE-1674E can boost then provides up to 15.4 watts at 48 VDC power to maximum 2 or 4 x PoE ports on each module. It allows power to be supplied to connected devices, such as PoE-based GigE cameras in machine vision inspection systems, without the need to use separate PoE injectors for those applications. The PCIE-1672E/PCIE-1674E is ideally designed for scientific research instrumentations, Medical Research Instrumentations, Gigabit Ethernet surveillance IP cameras in intelligent transportation systems, which can also benefit from a scalable Gigabit backbone construction with Power-over-Ethernet support.
    • EagleEye

      0.3M-2M 單色/彩色智能相機
    • EagleEye IDR

      0.3M-2M 單色智能相機
    • EagleEye Pro

      0.3M-2M 單色/彩色智能相機
    • Inspector Pro

      PC-based 機器視覺軟體
  • 4-axis Embedded Motion Controller

    MVP-3245 provides embedded motion control platform for embedded motion applications with latest Intel Atom processor and SoftMotion technology and is aimed to machinery industry application with compact and slim form factor need.To meet different demands for industrial automation, MVP-3245 provides a variety of basic motion control functions, such as linear, circular and helical interpolation, T/S-curve speed profile and advanced motion function, such as E-Gear, E-CAM and Tangential Following. MVP-3245 also features the specific softmotion function for sector application, such as 2D compare trigger, Path DO and 3D Arc move. This controller also supports serial communication ports and several other networking interfaces. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.

    • MVP-3245

      MVP-3245 provides embedded motion control platform for embedded motion applications with latest Intel Atom processor and SoftMotion technology and is aimed to machinery industry application with compact and slim form factor need.To meet different demands for industrial automation, MVP-3245 provides a variety of basic motion control functions, such as linear, circular and helical interpolation, T/S-curve speed profile and advanced motion function, such as E-Gear, E-CAM and Tangential Following. MVP-3245 also features the specific softmotion function for sector application, such as 2D compare trigger, Path DO and 3D Arc move. This controller also supports serial communication ports and several other networking interfaces. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
  • Centralized Motion Control Solution

    集中式運動控制解決方案包含 4 軸、6 軸及 8 軸運動控制卡、嵌入式運動控制器系統或脈衝輸出、電壓輸出、ISA 匯流排架構、PCI 匯流排架構、標準電腦架構控制器。 運動控制卡的功能相當多元,從高階 3 軸的圓弧插補卡,到低成本點對點的運動裝置皆有提供。 PCI-1240U 與 PCI-1243U 屬於 4 軸運動控制卡,能夠簡化脈衝型伺服馬達的控制。 PCI-1245 是 4 軸運動控制卡,利用高效能的 DSP 來計算運動軌跡。 PCI-1784U 是 PCI 匯流排適用的 4 軸運動控制正交編碼器與計數卡。PCL-833 與 PCL-839+ 為 3 軸運動控制 ISA 介面卡。 PCM-3240 是在沒有處理器負載下執行的 4 軸運動控制卡。 最後的 PEC-3240 是嵌入式運動控制器,程式設計者可以利用其嵌入式運動控制器來加快系統部署的速度。 除此之外,還有提供 6 軸運動控制及 8 軸運動控制解決方案。

    • PCI-1245LIO

      The PCI-1245L/45LIO are 4-axis universal PCI cards (supporting both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control card designed for entry-level applications which need to control JOG, point to point, continuous move and interpolation motion such as 2-axis linear, 3-axis linear (PCI-1245LIO) and 2-axis arc move (PCI-1245LIO). The PCI-1245LIO also provide extra 16 DI and 16 DO via terminal board, MTB-3956LIO. In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming load, helping users complete configuration and diagnosis easily.
    • MIC-3285

      MIC-3245/3285 is a 4/8-axis compact PCI stepping/pulse-type servo motor control card designed for applications which need to control linear interpolation, electronic gear, continuous contouring (circular trajectories and auto blending are excluded). MIC-3245/3285 utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as linear interpolation, 2/3- axis circular interpolation, helical interpolation, T/S-curve acceleration/deceleration rate, speed override, 16 home modes and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • MIC-3245

      MIC-3245/3285 is a 4/8-axis compact PCI stepping/pulse-type servo motor control card designed for applications which need to control linear interpolation, electronic gear, continuous contouring (circular trajectories and auto blending are excluded). MIC-3245/3285 utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as linear interpolation, 2/3- axis circular interpolation, helical interpolation, T/S-curve acceleration/deceleration rate, speed override, 16 home modes and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1285

      PCI-1285 is a 8-axis universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for applications which need to control interpolation, synchronization among multiple axes, continuous contouring and high speed triggering to integrated machine vision solution. PCI-1285 utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as up to 8-axis linear interpolation, 2- axis circular interpolation, helical interpolation, T/S-curve acceleration/deceleration rate and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1265

      PCI-1265 is a 6-axis universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for applications which need to control interpolation, synchronization among multiple axes, continuous contouring and high speed triggering to integrated machine vision solution. PCI-1265 utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as up to 6-axis linear interpolation, 2-axis circular interpolation, helical interpolation, T/S-curve acceleration/deceleration rate and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1245

      PCI-1245 is a 4-axis universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for applications which need to control interpolation, synchronization among multiple axes, continuous contouring and high speed triggering to integrated machine vision solution. PCI-1245 utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as up to 4-axis linear interpolation, 2- axis circular interpolation, helical interpolation, T/S-curve acceleration/deceleration rate and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1285E

      PCI-1245E/1285E is a 4/8-axis economic universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for entry-level applications which need to control linear interpolation, electronic gear, continuous contouring (circular trajectories and auto blending are excluded). PCI-1245E/1285E utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2~8-axis linear interpolation, E-Gear (only for PCI-1245E), T/S-curve acceleration/deceleration rate, speed override, 16 home modes and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1245E

      PCI-1245E is a 4-axis economic universal PCI (supporting both 3.3 V and 5 V signal slot) stepping/pulse-type servo motor control card designed for entry-level applications which need to control linear interpolation, electronic gear, continuous contouring (circular trajectories and auto blending are excluded). PCI-1245E utilizes the high-performance DSP and FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2~8-axis linear interpolation, E-Gear (only for PCI-1245E), T/S-curve acceleration/deceleration rate, speed override, 16 home modes and so on. In addition, Advantech supplies a Common Motion API library, graphical utility and user-friendly examples to decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1245L

      The PCI-1245L is a 4-axis universal PCI card (supporting both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control card designed for entry-level applications which need to control interpolation, synchronization among multiple axes, with SoftMotion algorithm inside to perform the motion trajectory and precise movement. The PCI-1245L utilizes the high-performance FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2 axis linear interpolation, T/S-curve, speed override, programmable acceleration/deceleration rate, 16 home modes and so on. In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming load, helping users complete configuration and diagnosis easily.
    • PCI-1220U

      Advantech's PCI-1220U is a 2-axis Universal PCI stepping/pulse-type servo motor control card. This card adopts NOVA MCX312 IC which supports 2-axis motion control with interpolations. Besides, functions like continuous interpolation, programmable T/S-curve acceleration/deceleration, constant speed control are also accomplished. For users that only need to drive two motors at most, PCI-1220U is a cost-effective solution than 4-axis motion control cards. The DLL driver for PCI-1220U together with the utility make it easy for users to test the functionalities of the card and to develop their own application.
    • PCI-1240U

      Advantech introduces the PCI-1240U 4-axis stepping/pulse-type servo motor control card designed for general-purpose extreme motion applications. The PCI-1240U is a high-speed 4-axis motion control card for the PCI bus that simplifies stepping and pulse-type servo motor control, giving you added performance from your motors. The card’s intelligent NOVA ® MCX314-motion ASIC builds in a variety of motion control functions, such as 2/3-axis linear interpolation, 2- axis circular interpolation, T/S-curve acceleration/deceleration rate and more. In addition, the PCI-1240U performs these motion control functions without processor loading during driving. For advanced applications, we supply Windows DLL drivers and user-friendly examples to decrease your programming load. Moreover, through a free bundled PCI-1240U motion utility, you can complete configuration and diagnosis easily.
    • PCI-1243U

      PCI-1243U is a 4-axis stepping motor control card with universal PCI interface. Each axis can be controlled directly through the card's I/O registers. This board is economic solution for stepping motor which provides 4 channels pulse train, T/S speed profile, on-the-fly velocity change and so on. The board is supplied with DLL library for Windows programmer to write the program. With the DLL driver, you can easily link to VC ®, Visual Basic® or BCB.
    • PCI-1784U

      PCI-1784U is a 4-axis quadrature encoder and counter add-on card for PCI bus. The card includes four 32-bit quadruple AB phase encoder counters, 8-bit timer with multi range
    • PCL-833

      PCL-833 is a 3-axis quadrature encoder and counter add-on card for the IBM PC/AT and compatibles (ISA bus). This card lets your PC perform position monitoring for motion controlsystems. Each input includes a decoding circuit for incremental quadrature encoding. Inputs accept either single-ended or differential signals. Quadrature input works with or withoutan index, allowing linear or rotary encoder feedback.PCL-833 has three independent 24-bit counters. The maximum quadrature input rate is 1.0 MHz, and the maximum input rate in counter mode is 2.4 MHz. You can individuallyconfigure each counter for quadrature decoding, pulse/direction counting or up/down counting.PCL-833 provides five digital input channels. Each channel accepts digital input as an index input for a rotary encoder or as a home sensor input for a linear encoder. The card cangenerate an interrupt to the system based on a signal from its digital inputs, overflow/underflow of its counters, or on a programmed time interval. It can repeatedly generate interruptsat any time interval you specify, from 0.1 msec. to 255 sec. These interrupts let you precisely monitor the speed of a control system.
    • PCL-839+

      PCL-839+ three axis intelligent stepping motor control card turns your IBM-compatible PC into a 3-axis motion-control station. The card’s one PCD-4541 intelligent controller chipscan execute a variety of motion-control commands. For advanced applications, we supply function libraries which you can link to your C program.You can control each axis directly through the card’s I/O registers. but use of the card’s high-level interpreter is recommended. This interpreter reads high-level commands from atext file to perform specific tasks. We also supply function libraries which you can call from your C program. The libraries come with ‘Turbo C’ source code which you can recompileif you want to access the libraries from other C compilers.
  • Distributed Motion Control Solution

    AMONet RS-485 系列的分散式運動控制產品分類為從屬模組與主控卡。 AMAX-1220/1240/2240 系列用來增加分散式運動控制網路的軸數;AMAX-1750/2750 系列可擴充數位 I/O 能力,每個數位輸入模組可減少驅動器與控制器之間的佈線。 當主控卡安裝在主機電腦時,PCI-1202U 與 PCM-3202P 主控卡可收集及發佈資訊到主機電腦。 AMONet RS-485 的優點在於它和不同廠商之馬達驅動器的相容性,例如 Panasonic、Mitsubishi 及 Yaskawa。 因此,AMONet 的設計目的旨在處理分散式運動控制系統費時的接線與維護問題。

    • AMAX-1220

      AMAX-1220 and AMAX-1240 have compact open frame designs for horizontal placement and an interface connector mounted on the board. With a transfer cable to servo drive, both models can conveniently connect to Mitsubishi J3, Yaskwa Sigma V and Panasonic A4/A5. The AMAX-1220 is an economic 2-axis AMONet slave module which supports motion functionality in point-to-point (PTP), linear & circular interpolation, simultaneously start/stop among multiple slave modules, and brake signal to servo for emergence consideration. The AMAX-1240 is an advanced 4-axis AMONet slave module which not only supports AMAX-1220 motion functionality, but also supports advanced features in position compare and triggering function. Both linear interval and table setups are supported.
    • AMAX-1240

      AMAX-1220 and AMAX-1240 have compact open frame designs for horizontal placement and an interface connector mounted on the board. With a transfer cable to servo drive, both models can conveniently connect to Mitsubishi J3, Yaskwa Sigma V and Panasonic A4/A5. The AMAX-1220 is an economic 2-axis AMONet slave module which supports motion functionality in point-to-point (PTP), linear & circular interpolation, simultaneously start/stop among multiple slave modules, and brake signal to servo for emergence consideration. The AMAX-1240 is an advanced 4-axis AMONet slave module which not only supports AMAX-1220 motion functionality, but also supports advanced features in position compare and triggering function. Both linear interval and table setups are supported.
    • AMAX-1752

      The AMAX-1752, AMAX-1754 and AMAX-1756 are compact open frame designs for horizontal placement, on-board screw terminal for direct wiring and on-board easily-visible LED indicators are for system diagnosis. All the digital I/O slave modules could be connected and distributed by standard LAN cables thereby saving wiring costs and maintenance. Three models are introduced: 32-ch digital input (AMAX-1752), 32-ch digital output (AMAX-1754) and 16-ch digital input/output (AMAX-1756). According to maximum communication baud rate, 2048 I/O points can be scanned and updated within 1.04 ms.
    • AMAX-1754

      The AMAX-1752, AMAX-1754 and AMAX-1756 are compact open frame designs for horizontal placement, on-board screw terminal for direct wiring and on-board easily-visible LED indicators are for system diagnosis. All the digital I/O slave modules could be connected and distributed by standard LAN cables thereby saving wiring costs and maintenance. Three models are introduced: 32-ch digital input (AMAX-1752), 32-ch digital output (AMAX-1754) and 16-ch digital input/output (AMAX-1756). According to maximum communication baud rate, 2048 I/O points can be scanned and updated within 1.04 ms.
    • AMAX-1756

      The AMAX-1752, AMAX-1754 and AMAX-1756 are compact open frame designs for horizontal placement, on-board screw terminal for direct wiring and on-board easily-visible LED indicators are for system diagnosis. All the digital I/O slave modules could be connected and distributed by standard LAN cables thereby saving wiring costs and maintenance. Three models are introduced: 32-ch digital input (AMAX-1752), 32-ch digital output (AMAX-1754) and 16-ch digital input/output (AMAX-1756). According to maximum communication baud rate, 2048 I/O points can be scanned and updated within 1.04 ms.
    • AMAX-2241/PMA

      AMAX-2240 series is used to increase the number of axes for an AMONet RS-485 distributed motion control network. These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller. This is very suitable for highly integrated machine automation applications. Please select cable SCSI-20P and plug this cable into the motor driver and motion slave module.
    • AMAX-2242/J2S

      AMAX-2240 series is used to increase the number of axes for an AMONet RS-485 distributed motion control network. These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller. This is very suitable for highly integrated machine automation applications. Please select cable SCSI-20P and plug this cable into the motor driver and motion slave module.
    • AMAX-2243/YS2

      AMAX-2240 series is used to increase the number of axes for an AMONet RS-485 distributed motion control network. These extension slave modules connect serially by a simple and affordable Cat.5 LAN cable, reducing the wiring between driver and controller. This is very suitable for highly integrated machine automation applications. Please select cable SCSI-20P and plug this cable into the motor driver and motion slave module.
    • AMAX-2752SY

      The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2,048 I/O channels in 1.04 ms.
    • AMAX-2754SY

      The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2,048 I/O channels in 1.04 ms.
    • AMAX-2756SY

      The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2,048 I/O channels in 1.04 ms.
    • PCI-1202U

      PCI-1202U is a PCI interface card which supports two AMONet RS-485 master rings, and transfers data between host and slaves directly without any operations in between. Each ring can control up to 2048 I/O points, 64 axes, or a combination of I/O points and axes for motion control. The ring can support up to 20 Mbps transfer rate and a maximum communication distance of up to 100 meters. <br>The communication between master and slave is based on a customized RS-485 solution that saves wires, covers a long distance, supports high-speed communication and has time-deterministic features. The communication interface between master and host PC is accomplished by memory mapping. Various functions can be chosen on the slave modules, and standard industrial DIN-rail mounting design makes it easy to distribute them in the field. The master collects information from slave modules and publishes the information to its host PC.
    • PCM-3202P

      PCM-3202P is a PCI/104+ interface card which supports two AMONet RS-485 master rings, and transfers data between host and slaves directly without the need for further intervention. Each ring can control up to 2,048 I/O points, 256 axes, or a combination of I/O points and axes for motion control. The ring can support a transfer rate of up to 20 Mbps transfer rate and a maximum communication distance of up to 100 meters. <br><br> The communication between master and slave is based on a customized RS-485 solution that saves wires, covers a long distance, supports high-speed communication and has time-deterministic features. The communication interface between master and host PC is accomplished by memory mapping. Various functions can be chosen on the slave modules, and standard industrial DIN-rail mounting design makes it easy to distribute them in the field. The master collects information from the slave modules and publishes the information to the host PC.
  • DIN-rail Terminal Boards

    導軌型端子台是一款線路板,配備有 Panasonic Minas A 系列、Mitsubishi MR-J2S 系列和 Yaskawa Sigma 2 系列馬達的專用連接器,有效節省佈線作業的時間與人力。每片 ADAM-3900 系列線路板皆標榜內建導軌安裝的接線端子,這些端子係由通用螺絲的終端模組所構成,並專為工業應用的現場訊號佈線而設計。它們可以連接到研華產品的類比與數位埠,例如 PCL 系列。

    • ADAM-3956

      The ADAM-3956 terminal board provides convenient and reliable signal wiring for PCI-1240/1245/1245E/1245V/1245L/1265/1285/1285E with 100-pin SCSI connector. Its D-SUB 26P type connectors give you the quick and easy way to connect to the Panasonic A5/MINAS A , Yaskawa Sigma 5 , Mitsubishi J3S and Delta A2 servo motors.
    • ADAM-3955

      The ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
    • ADAM-3940

      40-pin Wiring Board with LED for AMAX-2241, AMAX-2242, AMAX-2243
    • ADAM-3943

      PCI-1243U Wiring Board with LED
    • ADAM-3952

      50-pin SCSI and IDC DIN-rail Wiring Board To Be Used With PCI-1220U, PCI-1240U, PCI-1245, PCI-1245E, PCI-1265, PCM-3240, PEC-3240